25mm Front Coil Strut Spacer Suitable for Toyota FJ Cruiser 4.0L

Fitment：
Compatible with Toyota Hilux 2005 on
Compatible with Toyota 120 &150 Prado
Compatible with Toyota FJ Cruiser

Note:

These front strut coil spacers are 25mm thick.

Feature:
-Brand New Front Strut Spacers 25mm
-Built to strict OEM standards specifications
-These spacers are 18mm thick and will lift the front of your car around 1.5inch
-The 18mm spacers fit on top of your strut top
-The lift spacer is NOT a 1:1 ratio - Means that the lift height achieved is much greater than the actual thickness of the spacer, As the lower control arm compounds the amount of lift due to its angle and length.
-You can use these with your standard suspension or with aftermarket suspension to help level out the typical nose down appearance that the 4x4 Vehicles have.

Package Including：
2x Front Spacers

Installation Recommends：
It is recommended that the Coil Strut Spacers are installed by a qualified and licensed mechanic. These instructions are only included as a rough guide to installation. All Bolts and Hardware removed should be double checked to ensure re-fitment to relevant factory specifications.

Note：
-It is recommended to arrange a front-end wheel alignment after installation.
-Failure to do so can result in alignment issues and uneven tyre wear.