Universal Wireless Steering Wheel Remote Control Button Suitable for Car Stereo

1.Remove the DVD navigation.

2.Navigation host, in the tail line to find the steering wheel multi-function control line, ACC line, ground wire, specific line function, please consult the navigator manufacturers.

3.The receiver has a corresponding bit line marking stickers ACC for automotive ignition wire, GND wire, KEY1, and KEY2 side control line, will connect the corresponding line, if only one party host navigation control line, please receive box with green and white line at the same time and received the navigation, for receiving antenna yellow. Please install after straightened as close as possible to the steering wheel, away from the navigation host location without fixed wiring.

4.Enter the DVD navigation settings, find the multi-function button learning (steering wheel settings), press and hold the button to learn the corresponding function (see DVD navigation instructions for specific operations)

2 x Controller

1 x Receiver Box

1 x Cable

4 x Screws and Nuts